pinctrl：ocelot：修复基于级别的中断上的系统挂起（CVE-2024-50196）
CVE编号
CVE-2024-50196利用情况
暂无补丁情况
N/A披露时间
2024-11-08漏洞描述
In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ```解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 系统 | debian_12 | linux | * | Up to (excluding) 6.1.115-1 | |||||
- 攻击路径 N/A
- 攻击复杂度 N/A
- 权限要求 N/A
- 影响范围 N/A
- 用户交互 N/A
- 可用性 N/A
- 保密性 N/A
- 完整性 N/A
| CWE-ID | 漏洞类型 |
Exp相关链接
版权声明
本站仅做备份收录，仅供研究与教学参考之用。
读者将信息用于其他用途的，全部法律及连带责任由读者自行承担，本站不承担任何责任。
评论