honeywell safety_manager_firmware 使用硬编码的凭证
CVE编号
CVE-2022-30314利用情况
暂无补丁情况
N/A披露时间
2022-07-29漏洞描述
Honeywell Experion PKS Safety Manager 5.02 uses Hard-coded Credentials. According to FSCT-2022-0052, there is a Honeywell Experion PKS Safety Manager hardcoded credentials issue. The affected components are characterized as: POLO bootloader. The potential impact is: Manipulate firmware. The Honeywell Experion PKS Safety Manager utilizes the DCOM-232/485 serial interface for firmware management purposes. When booting, the Safety Manager exposes the Enea POLO bootloader via this interface. Access to the boot configuration is controlled by means of credentials hardcoded in the Safety Manager firmware. The credentials for the bootloader are hardcoded in the firmware. An attacker with access to the serial interface (either through physical access, a compromised EWS or an exposed serial-to-ethernet gateway) can utilize these credentials to control the boot process and manipulate the unauthenticated firmware image (see FSCT-2022-0054).解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://www.cisa.gov/uscert/ics/advisories/icsa-22-207-02 | |
| https://www.forescout.com/blog/ |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 系统 | honeywell | safety_manager_firmware | * | Up to (excluding) r160.1 | |||||
| 运行在以下环境 | |||||||||
| 硬件 | honeywell | safety_manager | - | - | |||||
- 攻击路径 物理
- 攻击复杂度 低
- 权限要求 无
- 影响范围 未更改
- 用户交互 无
- 可用性 无
- 保密性 无
- 完整性 高
| CWE-ID | 漏洞类型 |
| CWE-798 | 使用硬编码的凭证 |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论