Junos OS EX拒绝服务漏洞
CVE编号
CVE-2020-1668利用情况
暂无补丁情况
N/A披露时间
2020-10-17漏洞描述
On Juniper Networks EX2300 Series, receipt of a stream of specific multicast packets by the layer2 interface can cause high CPU load, which could lead to traffic interruption. This issue occurs when multicast packets are received by the layer 2 interface. To check if the device has high CPU load due to this issue, the administrator can issue the following command: user@host> show chassis routing-engine Routing Engine status: ... Idle 2 percent the "Idle" value shows as low (2 % in the example above), and also the following command: user@host> show system processes summary ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 11639 root 52 0 283M 11296K select 12:15 44.97% eventd 11803 root 81 0 719M 239M RUN 251:12 31.98% fxpc{fxpc} the eventd and the fxpc processes might use higher WCPU percentage (respectively 44.97% and 31.98% in the above example). This issue affects Juniper Networks Junos OS on EX2300 Series: 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2.解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://kb.juniper.net/JSA11065 |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 应用 | juniper | junos | 18.2 | - | |||||
- 攻击路径 相邻
- 攻击复杂度 低
- 权限要求 无
- 影响范围 未更改
- 用户交互 无
- 可用性 高
- 保密性 无
- 完整性 无
| CWE-ID | 漏洞类型 |
| CWE-400 | 未加控制的资源消耗（资源穷尽） |
| NVD-CWE-noinfo |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论